欢迎来到上海力孚同科技有限公司!
服务热线:021-64097989
Articles
2025-10-29
2024-03-26
2025-12-19
2025-11-21
2023-09-08

高频电刀中性电极温升测试仪, 满足AAMI HF 18 标准和GB9706.202-2021,设计用于高频电刀中性电极的温升测试。
产品型号:
厂商性质:代理商
更新时间:2026-02-04
访 问 量:34
立即咨询
联系电话:021-64097989
高频电刀中性电极温升测试仪
当高频电流信号通过中性电极产生作用时,sw T 的“电子皮肤"产生与手术过程中病人皮肤及肌肉组织相同的温度变化。 SWT 配套软件针对连续性能检测和信息网络功能提供了所有必要的功能。
简单直观的用户界面帮助用户在短短几分钟完成中性电极性能的自动测试。提供专用测试软件及其数据处理装置。
1. 测试区域尺寸:12 cm x 22 cm
2. 空间分辨率:1 cm2
3. 温度传感器:16 x 26
4. 温度传感器阵列尺寸:16 x 26 = 416 Sensoren,
(每边超出测试区域 2 cm) (AAMI HF 18: + 1 cm)
5. 可选高频电流 700mA / 500mA / 350mA(成人 / 儿童 / 婴儿中性电极 )
6. 负荷时间 60 s
7. 皮肤厚度 20mm / 15mm / 10mm / 5mm
8. 负荷后温度测量时间 <1 s (AAMI HF18: 5 s)
9. 温度分辨率 0.1°C (AAMI HF 18: 0.3°C)
10. 结合GB9706.202的 201.15.101.5 的标准要求对于带有如下表所示患者重
量标记的中性电极,施加规定的试验电流I 试 60 S 后立即测量,同息者接触的任何 1cm2 面积或 1cm 范围内,zui大温升不应超过 6 ℃

11. 外形尺寸:535 x 203 x 364mm
12. 重量:14kg
13. 电源:100 ... 240 V AC, 47 ... 63 Hz
高频电刀中性电极温升测试仪

高频电刀中性电极温升测试仪 英文介绍
Testgerät für Neutralelektroden
Testing device for neutral electrodes
replaces tests on human volunteers
swaroTEST ist das erste Gerät auf dem Markt, das den Test von elektrochirurgischen Neutralelektroden gemäß IEC 60601-2-2 ermög- licht.
swaroTEST erzeugt in der „elektronischen Haut“ dieselbe Temperaturerhöhung, die beim HF-Stromdurch- gang durch die Neutralelektrode, die Haut und den darun- ter liegenden Muskel entsteht, so wie dies während einer Operation auftritt. Bis jetzt hinderte die schwierige Mess- methode an Versuchspersonen die Krankenhäuser und Fachhändler daran, diese wichtigen Qualitätsmerkmale von Neutralelektroden regelmäßig zu testen.
Die Steuersoftware des swaroTEST enthält alle not- wendigen Eigenschaften für eine laufende Qualitätskon- trolle und ist einfach in ein IT-Netzwerk einzubinden. Die Benützeroberfläche ist leicht zu bedienen und der gesam- te Qualitätstest läuft automatisch in wenigen Minuten am swaroTEST ab.
swaroTEST is the first device in the market that enables the testing of the electrosurgery neutral electrodes according to IEC 60601-2-2.
swaroTEST generates the same temperature in- crease in the “electronic skin" as caused by the application of an HF-current through the neutral electrode, the skin and the underlying muscles, as it happens in the course of an operation. Up to now the difficult measurement meth- ods with volunteers prevented most hospitals and distribu- tors from regularly testing this essential quality features of neutral electrodes.
The control software of the swaroTEST brings all necessary features for continuous quality checking and integrates in common information network architecture. The user interface is easy to use and thus the whole elec- trode quality check procedure is performed automatically in a few minutes by the swaroTEST device.
Größe der Messfläche (Vergoldete Messfläche) | 12 cm x 22 cm | Size of measuring pad (gold-plated area) |
Räumliche Auflösung | 1 cm² | Spatial resolution |
Temperatursensoren | 16 x 26 | Temperature sensors |
Fläche mit Temperatursensoren (jeweils 2 cm über die Messfläche hinaus) | 16 x 26 = 416 Sensoren, (IEC 60601-2-2: + 1 cm) | Size of temperature sensor array (exceeding the measuring area by 2 cm on each side) |
HF-Strom wählbar (Erwachsenen / Kinder / Baby Neut- ralelektroden) | 700mA / 500mA / 350mA | HF-current selectable (adult / children / baby neutral elec- trodes) |
Belastungszeit Standard (wählbar) | 60 s (10s … 300s) | Load time standard (selectable) |
Unterhautdicke | 20mm / 15mm / 10mm / 5mm | Hypodermis skin thickness |
Temperaturmessung nach Belastung | <1 s (IEC 60601-2-2: <15 s) | Temp. measurement after load |
Genauigkeit der Temperaturmessung | 0,3°C (IEC 60601-2-2: 0,5°C) | Accuracy of temperature measurement |
CQM-Simulation für Monitoring NE, Startimpedanz | 20 Ω ... 200 Ω ( = 100% ) | CQM simulation for monitoring NE Starting impedance |
CQM Impedanz Zunahme, relativ / Ohmwert bis zum Erreichen von AlarmArea Aa | 120% … 160% < 260 Ω (IEC 60601-2-2:201.8.4.101) | CQM impedance increase relative / Ohm value Until achievement of alarm area Aa |
Erforderliche PC-Eigenschaften PC requirements
Messparameter Measuring parameters
Betriebssystem | Windows 98 / 2000 / XP | Operating system |
Serieller Ausgang | 9 pin Sub-D | Serial output |
Graphik Karte OpenGL-fähig | min. 16 MB RAM, | Graphic card, qualified for OpenGL |
Empfohlene Bildschirmauflösung | 1024 x 768 | Recommended screen resolution |
Speicherbedarf auf Festplatte | ca. / approx. 5 MB | Hard disk space for software |
Arbeitsspeicher | min 128 MB | Memory RAM |
Technische Daten Technical Data
Dimension (Breite x Höhe x Tiefe) | 535 x 203 x 364 mm | Dimension (width x height x depth) |
Gewicht (Zentraleinheit mit Mess- platte und Kabel) | 14 kg | Weight (main unit including meas- uring table and cables) |
Stromversorgung: | 100 ... 240 V AC, 47 ... 63 Hz | Power supply: |
Stromaufnahme bei 700 mA HF Strom, Leerlauf | 0,7 A @ 230 V, 1,7 A @ 110 V < 0,1 A | Supply current @ 700 mA HF current, standby |
